HERMS Brewing Coil Kit V2

HERMS Coil Kit V2.

Only available with snap lock hose connectors.

Kit:

1 x Coil (10mm OD)

1 x Thermo-well kit (complete including 10mm Comp fitting)

1 x 90 degree elbow

2 x snap lock fittings

2 x 1/2" to 10mm compression fittings.

This kit is all the stainless hardware you require to make your HERMS heat exchange.

Requires thread tape.

Herms is the best option for mashing on your all grain home brewing system. Superior to RIMS as wort does not directly contact electric element therefore wort does not get scorched.

Herms coil produces the brightest wort to the kettle due to the wort being recirculated through the grain bed constantly during mashing.

Small coil size allows reduced heat exchange liquid volume of 1.7L giving you superior temperature ramp times.

We have tested these and they work efficiently for heat exchange in a 1.7L 2kw electric jug. Quicker ramp times can be achieved by increasing the electric element size to maximum rating of power outlet.

Dia approx 90- 95mm OD, height 260mm a total of approx nine coils.

Designed to fit a 1.7L electric jug. We recommend that coil is cleaned after use and drained and stored upside down . Shipping weight 0.8 Kg. Online Brewing Supplies