Herms 3.0 Kw HX Heat Exchange Full KIt

HERM-IT® 3.0KW HX HEAT EXCHANGE FULL KIT. SAVE 5% .
HERM-IT® HX HEAT EXCHANGE .
Vertical install only.

Stainless construction.
Chromed brass top coil glands.
Tri-clover end plates with silicon seals.
Tube length minus end caps 300mm.
Designed for optimal performance with our ELE-HXSS-2.4KW element.
3.0KW element option now available .
Requires approximately 1.8L of water to cover element , then insert the HERM-IT® coil.
Mounting bracket supplied with three pre-drilled holes.

Made for our HERM-IT HXSS housing.
Supplied with quality ABS enclosure and PG9 cable gland.
Requires 10A power point and cable connection.
Not supplied with cable or plug.
1" BSPP threaded mount.
Total length approx 300mm.
Exposed element length approx 240mm.
HERM-IT® COIL KIT.

Kit:
1 x Coil
1 x Thermo-well kit (complete including 10mm Comp fitting)
1 x 90 degree elbow
2 x Snap locks kits .
2 x 12mm compression fitting.
This kit is all the stainless hardware you require to make your HERM-IT® heat exchange.
Requires thread tape.
HERM-IT® COIL INFO
HERMS COIL , 304 Stainless steel 10mm OD tube.
Herm-it the best option for mashing on your all grain home brewing system.
Superior to RIMS as wort does not directly contact electric element therefore wort does not get scorched.
Herm-it coil produces the brightest wort to the kettle due to the wort being recirculated through the grain bed constantly during mashing.

Dia approx 90- 95mm OD, height 260mm a total of approx nine coils.

.
Online Brewing Supplies
Shipping weight : 7.0kG